Indesit IDL530 Low Ins Problem

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Indesit IDL530 Low Ins Problem

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • January 23, 2012 at 6:59 pm #67529
    OLLIE2806
    Participant

    Hi Guys,

    The complaint with this dishwasher was it was tripping the RCD about 10 mins into the cycle, yet i have it in the workshop with me and it wont trip the elecs for me, The ins Res is low when it is sat dormant (around 1.09Meg) but after its been running a while the readings come up to 150-200Meg.
    I have tried everything but cant find whats causing it to be so low when dormant & i cant get it to actually trip either.
    Has anyone come across this before?

    January 25, 2012 at 9:12 pm #367715
    OLLIE2806
    Participant

    Re: Indesit IDL530 Low Ins Problem

    Anyone? 🙁

    April 5, 2012 at 4:08 pm #367716
    toss
    Participant

    Re: Indesit IDL530 Low Ins Problem

    Have you tried testing the properties RCD it may be too sensitive

    April 5, 2012 at 4:34 pm #367717
    Martin
    Participant

    Re: Indesit IDL530 Low Ins Problem

    Surely it’s got to be a duff heater? Most common failure of all as a rule.

    April 9, 2012 at 6:23 pm #367718
    jonnieboy
    Participant

    Re: Indesit IDL530 Low Ins Problem

    heater or motor would be my bet
    when the reading is low why not disconnect these parts one at a time and see if it goes up

    April 10, 2012 at 6:33 am #367719
    Allsorts
    Participant

    Re: Indesit IDL530 Low Ins Problem

    Cable problem?

    April 10, 2012 at 5:31 pm #367720
    BobHope
    Participant

    Re: Indesit IDL530 Low Ins Problem

    cable/moulded plug are classic for this fault.

    Bob.

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.