Indesit IDL530 Low Ins Problem

[OLLIE2806]

Hi Guys,

The complaint with this dishwasher was it was tripping the RCD about 10 mins into the cycle, yet i have it in the workshop with me and it wont trip the elecs for me, The ins Res is low when it is sat dormant (around 1.09Meg) but after its been running a while the readings come up to 150-200Meg.
I have tried everything but cant find whats causing it to be so low when dormant & i cant get it to actually trip either.
Has anyone come across this before?

[OLLIE2806]

Re: Indesit IDL530 Low Ins Problem

Anyone? 🙁

[toss]

Re: Indesit IDL530 Low Ins Problem

Have you tried testing the properties RCD it may be too sensitive

[Martin]

Re: Indesit IDL530 Low Ins Problem

Surely it’s got to be a duff heater? Most common failure of all as a rule.

[jonnieboy]

Re: Indesit IDL530 Low Ins Problem

heater or motor would be my bet
when the reading is low why not disconnect these parts one at a time and see if it goes up

[Allsorts]

Re: Indesit IDL530 Low Ins Problem

Cable problem?

[BobHope]

Re: Indesit IDL530 Low Ins Problem

cable/moulded plug are classic for this fault.

Bob.

[Author]

Posts