- This topic has 5 replies, 3 voices, and was last updated 14 years, 2 months ago by
.
-
Posts
-
w/pool diplomat, will go through majority of cycle without heating, but for example. on 30min quick, it will actuate element for about 2 mins, and thats it… p/s gridis clear, and tests out ok, module is obv sending power out to element, and element is obvs ok too. not sure what the calibration should be for the ntc, but its not o/c… bit stuck really, thinking about it must admit havent checked any of the regen valves, but then cust did admit he was putting dw liquid in with the tablets as they kept pinging out the dispenser… (!) so had hoped it was overfoaming as it took 5 fills and drains to get rid off all the major suds… but it still wont heat up to steaming even on a 65* wash and therefore wont risidually dry properly.
dont suppose anyone has any programme breakdowns of when the heater should be actuated during use? im suspecting module, but in pristine condition, no burn outs, so could only be corrupted if it is, but hoping not…
Re: dippy diplomat adp8332 not heating ENOUGH!
ps: im guessing if not pcb it can only be ntc, but at £30 trade, its an expensive gamble? hasnt got a nasty askoll tho, so would you peeps agree its worth a punt?
Re: dippy diplomat adp8332 not heating ENOUGH!
Got a feeling the beko thermistor will work in this ,a much cheaper option 😉 Cras
Re: dippy diplomat adp8332 not heating ENOUGH!
Heater relay duff? Pop another relay on board and see if I stay on longer on the quick wash programme
Canufixit
Re: dippy diplomat adp8332 not heating ENOUGH!
heard about the beko one being usable, cust seems not sort to trust that kinda thing and insisted on new w.p. part to try, happy to pay for it even if it wasnt faulty. so used it to fill up a connect order. will let everyone know mon when its in whether it works, bouyed with confidence now i spotted monsier penguine’s also “dippy” diplomat post, as it also read 57 too!
- You must be logged in to reply to this topic.