Hoover Nextra Hnl 6166 Drum not turn Help

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Hoover Nextra Hnl 6166 Drum not turn Help

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • February 12, 2012 at 11:45 am #67852
    zomi
    Participant

    I have a hnl 6166 nextra

    a week ago it had a stuck sock in the pump, remvoed it and it was fine,

    Now this weekend, it has started to play up again.
    It starts the cycle water enters,
    And takes in the washing power then
    after that it just sits idle
    You can hear a click but it does not the turn the drum.

    I removed the motor and check the brushes they had more than 1/2 inch left on them.
    on the connector block one of the red wires, (live ?) had come off, i soldered this back on, and checked it had continuity to the motor and all else was fine,.

    What other things can i investigate ..
    And could this be an issue with the triac ?

    thanks

    February 12, 2012 at 12:32 pm #368779
    zomi
    Participant

    Re: Hoover Nextra Hnl 6166 Drum not turn Help

    just tries it again,
    When it has filled the drum,
    There is a click sound coming from the ecu/control module.
    It doesn’t progress any further after this.

    Am I correct in thinking the problem is most likley an issue with the pcb … triac etc/..

    February 12, 2012 at 3:46 pm #368780
    Martin
    Participant

    Re: Hoover Nextra Hnl 6166 Drum not turn Help

    That is for certain sure.:(

    February 14, 2012 at 1:41 pm #368781
    zomi
    Participant

    Re: Hoover Nextra Hnl 6166 Drum not turn Help

    Any one know where I can get values for the triacs
    I need a value for the little ones, on this board like the tr7

    Thanks

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.