hotpoint oven door

Home › Forums › Public Support Forums › Help And Support › Cooker And Oven Forum › hotpoint oven door

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • February 16, 2012 at 11:30 am #67939
    ganoble
    Participant

    Hi
    I have fitted two new hinges to my top oven door on my Hotpoint double oven.
    The door will not remain open as spring closes it, also there is a fairly large gap Approx 6mm at the bottem when closed.The other part of the hinge fitted to the oven both look good.
    Can anyone help
    Thanks
    Geoff Noble

    February 16, 2012 at 2:05 pm #369099
    Washman
    Participant

    Re: hotpoint oven door

    Hi

    You forgot the most important thing, the model number and also the part numbers of the parts you fitted. then we may be able to help you.

    Washman

    February 16, 2012 at 2:20 pm #369100
    ganoble
    Participant

    Re: hotpoint oven door

    Thanks for return mail
    Hotpoint BD31
    Hinges COO199565
    Regards Geoff Noble

    February 16, 2012 at 2:43 pm #369101
    don
    Moderator

    Re: hotpoint oven door

    Hi

    Unfortunately there are too many versions of that machine to correctly identify the correct parts. Can you post up the s/n and the commercial code please which are on the sticker behind the main oven door.


    Don

    February 16, 2012 at 2:50 pm #369102
    ganoble
    Participant

    Re: hotpoint oven door

    Hi Don
    The sticker is not very clear best i can see is Seial No 42.1.00020 nothing else visual
    Regards
    Geoff Noble

    February 16, 2012 at 2:59 pm #369103
    don
    Moderator

    Re: hotpoint oven door

    Hi

    That’s a nuisance to say the least 😉 in that case you will need to look at either the top or the rear of the oven for the model number.

    If not pratical can you post up any pictures of the old hinges which some kind person on here may recognise?

    Don

    February 16, 2012 at 3:03 pm #369104
    ganoble
    Participant

    Re: hotpoint oven door

    Hi Don
    Have looked closely at the new and old and there is a slight dimensional difference approx 2mm from the centre of the pivot pin to the slot which locates the hinge on to the main oven Also new has a locking bracket that pivots into locating slot
    Hope this is clear
    Model No BD31
    Geoff Noble

    February 16, 2012 at 3:22 pm #369105
    Martin
    Participant

    Re: hotpoint oven door

    The hinges you need for the Top Oven Door are = C00223945

    The ones you ordered fit the Main Oven Door. 😉

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.