Whirlpool dishwasher spray arm question.

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Whirlpool dishwasher spray arm question.

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • February 20, 2012 at 6:55 pm #68001
    iadom
    Moderator

    Model ADG7440

    Fitted a new motor to this, the old Askoll pump was goosed.

    Generally working fine but noticed that the upper spray arm nozzle does not appear to be sealing that well at the back of the tub. It appears as though a white rubber washer has perished in the lower of the two holes that the spray arm slots into at the back. Looking on SIOS the diagram is not that clear but it looks as though I would need to order part number 481253029118 which is the complete tube coming up from the base. Is this correct or can I just get the seals.?

    Jim.

    February 20, 2012 at 7:40 pm #369261
    johnmac11
    Participant

    Re: Whirlpool dishwasher spray arm question.

    The seals are part of the tube, that is the correct part number you have.

    John

    February 20, 2012 at 8:54 pm #369262
    iadom
    Moderator

    Re: Whirlpool dishwasher spray arm question.

    Typical Whirlpool, £40 + list price when all I need is a couple of small rubber washers. 😥

    Thanks John, I think . 😀

    February 20, 2012 at 8:57 pm #369263
    johnmac11
    Participant

    Re: Whirlpool dishwasher spray arm question.

    Try CDSL they have it for £30 + VAT

    John

    February 20, 2012 at 9:07 pm #369264
    iadom
    Moderator

    Re: Whirlpool dishwasher spray arm question.

    Its a tiny fraction less at Masterpart. 😉

    Still silly when it is only a 50p washer at best that I need. 😈

    February 21, 2012 at 12:02 am #369265
    leavemetogetonwithit
    Participant

    Re: Whirlpool dishwasher spray arm question.

    http://www.toolstation.com/shop/p23104
    First one I found on Google but there are plenty more about. If it’s a O ring there’s even less problem.
    Mike.

    February 21, 2012 at 9:34 am #369266
    iadom
    Moderator

    Re: Whirlpool dishwasher spray arm question.

    They are flat rubber washers, white ones though, made of the same material as used for the rubber, bungs/blanks in the top of the inner tub on these machines.

    She is not to bothered as she says it is working OK but there is some water leaking out from the joint.

    February 21, 2012 at 9:03 pm #369267
    leavemetogetonwithit
    Participant

    Re: Whirlpool dishwasher spray arm question.

    iadom wrote:
    She is not to bothered as she says it is working OK

    Customer’s always right 😉 and if it leads to further problems that’s her lookout.
    Mike.

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.