- This topic has 1 reply, 2 voices, and was last updated 14 years, 1 month ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
Hi, the inlet valve has 2 white and 2 blue wires which ive traced to a connection block near the main board,but cannot for the life of me find where it connects too, any ideas anyone.thanx
Re: indesit wia111uk wiring
Can’t really give you specific wiring advice however if you follow the solenoid wires you’re referring to they terminate at a multi plug edge connector on the main PCB without seeing the appliance I cant obviously say if there’s a short or a break or poor termination etc if you suspect a wiring fault you really should give an engineer a bell to make sure you get continued, safe , use of your appliance
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.