Need Wiring Diagram Zan ZUF270X Cooker See Pics

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Need Wiring Diagram Zan ZUF270X Cooker See Pics

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • February 22, 2012 at 10:25 pm #68052
    laurenceuk
    Participant

    Hi,

    Customer had a major milk boil-over on hob above cooker – timer covered in ‘burnt’ milk inside and around contacts.

    Since spill, top oven/grill element does not work – no supply at element tags. Grill element fine, main and top oven cut-outs ok, top oven fan cut-in ok. Top and lower oven thermostats ok. Top oven/grill selector switch looks ok.

    Top oven lower element heats when top oven selected.

    So reasonable to assume timer was the problem. But when fitted same problem. I marked leads before remove from top but when put back the marks rubbed off – now I don’t trust myself to have replaced them correctly. 😯

    Need a wiring diagram for above – prod 944171377.

    I need to check the timer wiring – any ideas for pointing me in right direction or can any one email me a copy.

    Thanks

    Laurence

    February 22, 2012 at 10:38 pm #369451
    Criscold
    Participant

    Re: Need Wiring Diagram Zan ZUF270X Cooker See Pics

    You have mail

    Colin

    February 23, 2012 at 8:26 am #369452
    laurenceuk
    Participant

    Re: Need Wiring Diagram Zan ZUF270X Cooker See Pics

    Thanks Colin,

    You’re a star for such a rapid response.

    The material shows the tags in different positions and on the clocks I have they are not labelled, I can id the relay tags and probably wont matter which lead goes to which tag but the other 2 (L&N) – will they matter which lead on which tag?

    Or from the picture could you indicate which are: 1, 1a, L,N.

    Thanks

    Laurence

    February 23, 2012 at 9:03 am #369453
    Criscold
    Participant

    Re: Need Wiring Diagram Zan ZUF270X Cooker See Pics

    Looking at the wiring diagram I don’t really think it matters which way round the L + N would go, I have searched and I am unable to find anymore info on the timer. As normal on these poor markings on the tags

    Colin

    February 23, 2012 at 9:10 am #369454
    laurenceuk
    Participant

    Re: Need Wiring Diagram Zan ZUF270X Cooker See Pics

    Thanks again Colin,

    Your help is very much appreciated.

    Laurence

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.