whirlpool adp 7408 d/w

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › whirlpool adp 7408 d/w

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • March 1, 2012 at 8:03 pm #68209
    Galway
    Participant

    evening all,
    looked at this today with f4/f1 errors displayed and water in sump.emptied by hand and checked drain pump.propellor was broken and very worn only one section left .fitted a new pump and tried d/w pumped out and started to fill.then f1 Ntc fault.
    is the ntc part of the sump level switch?why would these 2 faults appear together?
    thanks
    Niall

    March 2, 2012 at 11:27 am #370191
    Galway
    Participant

    Re: whirlpool adp 7408 d/w

    anyone a part no for ntc

    March 2, 2012 at 7:11 pm #370192
    Galway
    Participant

    Re: whirlpool adp 7408 d/w

    found the part no. 484000000420
    it is a blue switch owi + ntc probe all in one.
    anyone know if these give problems?

    March 24, 2012 at 5:35 pm #370193
    Galway
    Participant

    Re: whirlpool adp 7408 d/w

    finally got part and fitted it
    job done.
    this part fits where the old type vacuum level switch fits in the sump.not exactly sure how it controls the water level as it is solid plastic but has lenses, but it also acts as the ntc as it has a probe for temp.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.