zanussi zwf16281w 914522520/00

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › zanussi zwf16281w 914522520/00

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • March 6, 2012 at 7:47 pm #68301
    adv
    Participant

    how do you delete the error code on these ? got it into test mode turn round to 6pm get code then turn to off , i turn one to right a get ele then does a test wash it seems but, reset with pause button but still just emptys on all programmes. am i doin something wrong ? help lads?

    March 6, 2012 at 9:40 pm #370516
    chris211
    Participant

    Re: zanussi zwf16281w 914522520/00

    whilst you are reading error code you need to press the same 2 buttons used to access diagnostics that will clear code, then turn to off then on then off again it should then be back to normal after you have fixed the fault that is

    March 6, 2012 at 10:09 pm #370517
    adv
    Participant

    Re: zanussi zwf16281w 914522520/00

    ok thanks it was a blocked pump . but was showing e50 out of balance . does that make sence ?

    March 7, 2012 at 9:31 pm #370518
    chris211
    Participant

    Re: zanussi zwf16281w 914522520/00

    the E50 doesnt really, that code relates generally to a motor fault or pcb pump/filter problems would normally be in the E20 range or E10 poor drainage if i remember right out of balance are usually EF codes

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.