- This topic has 1 reply, 2 voices, and was last updated 14 years ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
Hi,
Have the inlet/drain flashing. I cleared this by switching off at the mains and setting a new programme (not sure if this completely clears it). Cleaned inlet filter and non return valve. It now fills quickly and also drains well but no cycling pump.
Is there a reset procedure and am I missing something else.
Thanks
RobRe: Miele HG01 40/79306491 6975SCPlus
Check the cable to small P.C.B of the water counter, & also the seating of the P.C.B in regard to the magnet. If its not seated correctly the reed switch on P.C.B won’t pick up signal from magnet & thinks its not filled. Circulation pump motor could also be blocked up, its an easy job to split & check.
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.