AEG 3085VI

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › AEG 3085VI

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • March 19, 2012 at 5:16 pm #68508
    timdowning
    Participant

    911939222

    Went to this one last week. No heat reported.

    I put it on a quick wash and it heated fine. I took the board out to look for dodgy solder points but all was ok. Loom & heater ok as well. Pinched the connector on the temp sensor.

    Apparently it did one wash ok but is now not heating again.
    I’m quoting for a module but wanted to see if anyone has had the temperature sensor in the sump give an intermittant no heat.

    Ta.

    March 19, 2012 at 5:57 pm #371377
    Criscold
    Participant

    Re: AEG 3085VI

    Have you tried the diagnostic cycle to get error code on this machine ?

    Colin

    March 20, 2012 at 6:50 am #371378
    timdowning
    Participant

    Re: AEG 3085VI

    To be honest no. No user error was displayed, went through cycle and ended but no heat at end. (On 65oC wash.)
    The 30 minute wash worked fine for me.
    Do you have diagnostics for this model? Ta.

    t.downing@hotmail.co.uk

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.