hotpoint sdd910

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › hotpoint sdd910

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • March 24, 2012 at 10:17 am #68606
    dealdd
    Participant

    hi there has anyone got error codes for sdd910??

    March 24, 2012 at 11:02 am #371982
    iadom
    Moderator

    Re: hotpoint sdd910

    Same as THESE

    I have edited that post to include these now. 😀

    Jim.

    March 26, 2012 at 2:39 pm #371983
    dealdd
    Participant

    Re: hotpoint sdd910

    a11 not in list

    March 26, 2012 at 3:47 pm #371984
    iadom
    Moderator

    Re: hotpoint sdd910

    😳 OOPS.
    It darned well should be, its a very common fault on this ‘quality’ appliance. :rolls:

    A11..Wash pump faulty or wiring / connections between pump motor
    and module faulty.

    Jim.

    March 27, 2012 at 10:46 am #371985
    dealdd
    Participant

    Re: hotpoint sdd910

    ok cheers for that i cleaned the filters on this machine and it has fixed problem???

    January 15, 2013 at 5:48 pm #371986
    scots
    Participant

    Re: hotpoint sdd910

    iadom wrote:😳 OOPS.
    It darned well should be, its a very common fault on this ‘quality’ appliance. :rolls:

    A11..Wash pump faulty or wiring / connections between pump motor
    and module faulty.

    Jim.
    I have the same fault, never seen it before.
    You mention it being a common fault, can you tell me what causes it.
    You say its motor or maybe wiring. Can you say what is more common?

    Thanks
    Brian

    January 15, 2013 at 5:51 pm #371987
    iadom
    Moderator

    Re: hotpoint sdd910

    Wash pump failures are very common on these, impellor comes adrift, integral heater fails, pcb sets on fire etc. :rolls:

    January 15, 2013 at 6:46 pm #371988
    scots
    Participant

    Re: hotpoint sdd910

    thanks for the info. Problem is, if it doesnt do it while you are there and all tests ok. You have to go for board or motor and as both are expensive I cannot afford to get it wrong.

    I will be going back on Sat so will let you know.

    Thanks again

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.