Bosch wae28162gb tripping consumer unit

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch wae28162gb tripping consumer unit

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • March 26, 2012 at 1:02 am #68625
    crockett
    Participant

    Hi all. I have a Bosch wae2816GB tripping the consumer unit 5 minutes or so into the wash. I have checked element pump and motor it fills heats emtys and spins but when on a programme it trips the consumer unit checked for earth leakage with meter and its ok .any help please. crockett
    Sent from my GT-S5830 using Tapatalk

    March 26, 2012 at 7:19 am #372051
    Martin
    Participant

    Re: Bosch wae28162gb tripping consumer unit

    crockett wrote:checked for earth leakage with meter and its ok .

    What of the supply, is the wall socket in order? Your megger reading has to be greater than 50 Mohms to be sure the machine is OK. The motor and heater are the most likely sources of trouble as you know.

    By the way, you should post these questions in Trade Tech not General. 😉

    March 26, 2012 at 7:39 pm #372052
    crockett
    Participant

    Re: Bosch wae28162gb tripping consumer unit

    Thanks Martin will check wall socket and have a closer look at everything in the workshop thanks again for your prompt reply.Apologies about wrong forum section I will use proper one front now on. cheers crockett .

    Sent from my GT-S5830 using Tapatalk

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.