Miele S5210

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Miele S5210

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • April 3, 2012 at 3:57 pm #68774
    dave-m
    Participant

    Hi all, got one of these not working from a customer today,
    First off, how do you take it apart??
    I removed all the filters and cleaned them and all the inside before working on it and my son plugs it in when i’m not looking and hey presto, it’s now working.
    I can’t seem to fault it other than i think the motor sounds rough, but i’ve never used or worked on one before so…
    I stinks too, from pet hair it would seem, and i’m not sure now if the smell is just from that or whether it’s the motor struggling causing some of the noise and the smell.
    Anyway, sure as s@#t when i give it back it’ll fail again so i’d like to be armed when i get the call.

    Anyone?

    Dave

    April 3, 2012 at 4:02 pm #372727
    dave-m
    Participant

    Re: Miele S5210

    Just found out how to get into it,
    Does anyone know do the motors on these cause trouble.

    d

    April 3, 2012 at 4:31 pm #372728
    clockworkone
    Participant

    Re: Miele S5210

    only ever did one and it was dry joint on pcb behind motor.cost of new motor if needed will prob ber this one.

    April 3, 2012 at 4:38 pm #372729
    dave-m
    Participant

    Re: Miele S5210

    Just putting it back together after i found this, a great link.

    http://www.asciimation.co.nz/bb/2009/12 … um-cleaner

    Still found nothing wrong though.


    dave

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.