bosch d/w sgs45e6gb/64 pump acess

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › bosch d/w sgs45e6gb/64 pump acess

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • April 5, 2012 at 8:06 pm #68810
    JENKS
    Participant

    can anyone tell me the easiest way to access the circulation pump on above machine.fault i have is top spray arm u/s,i think foriegn body in pump dropping pressure

    April 6, 2012 at 8:27 am #372828
    Martin
    Participant

    Re: bosch d/w sgs45e6gb/64 pump acess

    JENKS wrote:can anyone tell me the easiest way to access the circulation pump on above machine.

    Yes just read THIS THREAD

    JENKS wrote:fault i have is top spray arm u/s,i think foriegn body in pump dropping pressure

    The fault is more likely to be a faulty water point diverter inside the heater box (Pt No 483058) than anything blocking the circulation pump. 😉

    April 6, 2012 at 9:28 am #372829
    JENKS
    Participant

    Re: bosch d/w sgs45e6gb/64 pump acess

    would a faulty water point diverter still allow the bottom spray arm to turn

    April 6, 2012 at 9:57 am #372830
    Criscold
    Participant

    Re: bosch d/w sgs45e6gb/64 pump acess

    Yes it would, If nothing is blocking the inlet to the circ pump then I would go with the heater box as Martin says and I have done a few because of this fault. is the machine getting enough water ?

    April 6, 2012 at 1:05 pm #372831
    JENKS
    Participant

    Re: bosch d/w sgs45e6gb/64 pump acess

    yes machine is filling as normal,lower spray arm turns but upper does not even tho it does have water coming through it but i presume pressure is not enough to turn it.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.