cleaning dyson dc14 cyclones

Home › Forums › Public Support Forums › Help And Support › Vacuum Cleaner Help Forum › cleaning dyson dc14 cyclones

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • April 23, 2012 at 9:45 am #69082
    nocando
    Participant

    Hi guys.my dc14 has lost alot of suction.Motor,filter and roller belt all in good condition.looking at forums i see that the cyclone tubes can get blocked over time.My dc is 7yrs old. How do i get at the tubes to clean them out ?

    April 23, 2012 at 10:15 am #373644
    don
    Moderator

    Re: cleaning dyson dc14 cyclones

    Hi

    I have heard of people taking these to their local garage and having them blown through with an airline. However I don’t know how successful this has been.

    Replacement cyclones are around the £35 mark :rolls:

    HTH 🙂

    Don

    April 23, 2012 at 12:32 pm #373645
    nocando
    Participant

    Re: cleaning dyson dc14 cyclones

    thanks Don

    April 23, 2012 at 12:35 pm #373646
    Muv
    Participant

    cleaning dyson dc14 cyclones

    If you have good suction from the wand,but not from the base of the cleaner.. You could try checking the small clear plastic hose that runs from the side of the brushroll… Usually you will find these have a tear in them, which seriously affects suction…

    Hope this helps

    Martin

    July 24, 2012 at 1:21 pm #373647
    nocando
    Participant

    Re: cleaning dyson dc14 cyclones

    thanks martin

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.