INDESIT WM12X

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › INDESIT WM12X

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • May 24, 2012 at 1:10 pm #69639
    blueboy77777
    Participant

    M/c stops on wash cycle and then dial stats to click around. i noticed that the fabric conditioner is still in tray.i have reset the reset programme and then put m/c onto spin cycle this results in a a gurgling sound which echos via sink plughole and the m/c makes a buzzing sound. after 4 or 5 mins the m/c stats to spin. for the last few weeks a small amount of foul smelling water has coming up into kitchen sink.

    May 24, 2012 at 4:22 pm #375454
    Martin
    Participant

    INDESIT WM12X

    The drain coupling under your sink is blocked!

    May 28, 2012 at 8:50 am #375455
    blueboy77777
    Participant

    Re: INDESIT WM12X

    thanks martin drain coupling under sink was blocked but still have previous problem. ie m/c still stops on wash cyle then dial clicks around. after resetting dial programme to spin and removing washing later on there is a small amount of smelly water left in m/c which i have had to remove via valve/plug at front of m/c.

    May 28, 2012 at 10:36 am #375456
    Martin
    Participant

    INDESIT WM12X

    Soapy water gets smelly very quickly (within a few short hours) so I wouldn’t read much into that. I’m assuming now you’ve cleared the blockage and the machine drains out OK or is the dial clicking round preventing that from happening?

    Next question: When the dial clicks around, count the number of flashes the red light shows. (a series of rapid flashes followed by a seconds pause before repeating the number over and over whilst the dial is moving)…?

    May 30, 2012 at 4:45 pm #375457
    blueboy77777
    Participant

    Re: INDESIT WM12X

    monday evening m/c worked fine? no’3 progamme staight through to spin etc = great no dial clicking. water still came up into sink. today wednesday opened m/c door to find 2″ of dirty water in drum. put m/c onto spin and drained water away – still part of the water came up into sink. all pipes are cleaned/ un blocked as is pipe coming from pump to u bend under sink.

    May 30, 2012 at 5:50 pm #375458
    Martin
    Participant

    INDESIT WM12X

    blueboy77777 wrote:put m/c onto spin and drained water away – still part of the water came up into sink.

    It’s obvious from that statement that your sink drain (going outside) needs clearing then. I bet there’s years of fat deposits, tea leaves and any amount of gunge blocking those old pipes!

    May 31, 2012 at 7:22 am #375459
    bryan-206
    Participant

    INDESIT WM12X

    Water into sink only means one thing. Your plumbing is restricted/blocked.


    —
    I am here: http://tapatalk.com/map.php?jj5olt
    Life’s a bitch ain’t it!

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.