- This topic has 7 replies, 3 voices, and was last updated 13 years, 10 months ago by
.
-
Posts
-
Can anybody enlighten me on how to gain access to fit an oven selector switch, without having to strip it down completly as i’m not Gas Safe i want to be able to do it with the minimum of disruption, its for a letting agent and i dont want to tackle it if it is a total strip down cheers JJ
Smeg A2 Range cooker
Straight forward . Just need to remove facia panel to get access to side panel screws. Bout 4 screws front and back then side panel should come off easy with bit of a twist . No need to touch top at all .
Re: Smeg A2 Range cooker
not really correct info there. on an A2 the complete hob will lift up, car bonnet style. control panel off, remove 2 screws in the top corners of each leg just under the hob. 2 similar screws at rear that just need loosening and then the complete hob will hinge upwards, they even have 2 “bonnet props” to hold it up on each side whist working. no need to touch any part of the gas circuit.
Smeg A2 Range cooker
My mistake must be thinking of different model lol. Either way would work thou I should think
Re: Smeg A2 Range cooker
dcroome wrote:My mistake must be thinking of different model lol. Either way would work thou I should think
yep, the SUK range can be done from the side panel.
Re: Smeg A2 Range cooker
Had a go still not got anywhere i couldnt see how the side comes off, does anybody have a manual which might help cheers JJ
- You must be logged in to reply to this topic.