Hoover VHC 180

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hoover VHC 180

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • June 14, 2012 at 9:15 am #69940
    Muv
    Participant

    Hi
    I need to change the heater assembly in this machine..
    Is it possible to do,without removing the drum?

    Do the side panels come away

    Last one of these I had off eBay,with full intention of refurbishing it..
    Ended up a nightmare of a job…and now sits as a pile of spare parts!

    Martin

    June 14, 2012 at 9:38 am #376506
    AMS
    Participant

    Re: Hoover VHC 180

    Side panels don’t come off. You should be able to get enough slack on the cables by releasing the cable tie that pokes through the back of the machine. Don’t pull too hard on the cables or they could come apart. Do them one at a time and keep hold of the end as you disconnect them.

    Dave

    June 14, 2012 at 5:33 pm #376507
    Muv
    Participant

    Hoover VHC 180

    Many thanks for that dave.
    I will give that a try

    Martin

    June 19, 2012 at 2:44 pm #376508
    Muv
    Participant

    Hoover VHC 180

    Worked a treat.!

    Thanks Dave

    June 19, 2012 at 4:21 pm #376509
    AMS
    Participant

    Re: Hoover VHC 180

    Glad to be of service, Martin.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.