ELECTROLUX INSPIRE W/M EWM14780W. PROD 914527306

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › ELECTROLUX INSPIRE W/M EWM14780W. PROD 914527306

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • June 27, 2012 at 7:47 am #70166
    richardable
    Participant

    reported fault w/m will only drain.
    checked vsrious programs and the w/m would only drain.
    customer said her son was seen pushing various buttons whilst the machine was running ( possibly on the spin cycle)
    is there a reset available?

    June 27, 2012 at 8:32 pm #377252
    Seamy
    Participant

    Re: ELECTROLUX INSPIRE W/M EWM14780W. PROD 914527306

    If you go into service mode & check last fault code, post back, likely once you go in & come out of service mode it will reset.

    June 27, 2012 at 8:51 pm #377253
    A1engineer
    Participant

    Re: ELECTROLUX INSPIRE W/M EWM14780W. PROD 914527306

    usually this is to do with the new type pressure sensors, as seamy says a reset usually fixes it, if not try tapping the P/S and trying again,

    last resort new switch.

    June 28, 2012 at 6:23 am #377254
    richardable
    Participant

    Re: ELECTROLUX INSPIRE W/M EWM14780W. PROD 914527306

    thanks guys
    how do i get into service mode?
    richard
    able

    June 28, 2012 at 1:35 pm #377255
    timdowning
    Participant

    Re: ELECTROLUX INSPIRE W/M EWM14780W. PROD 914527306

    Just taking the pressure switch tube off is normally enough to right things.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.