Bosch SM150M05GB/28

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch SM150M05GB/28

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • June 27, 2012 at 9:50 pm #70181
    DDDave
    Participant

    This dishwasher overheats and stops with the 1 min left. I am thinking NTC but cant see one. Any advice please, is there a test procedure ? Thanks.

    June 28, 2012 at 7:48 am #377305
    Martin
    Participant

    Re: Bosch SM150M05GB/28

    DDDave wrote:is there a test procedure ?

    Overheat (NTC) error would normally throw up an E11 error. The NTC’s are embedded within the heat pump itself, terminals 5,6 & 7. Resistance readings at 20C should be (approx) as follows: –

    Between terminals 5 & 6 = 10 K?
    Between terminals 6 & 7 = 10 K?
    Between terminals 5 & 7 = 20 K?

    HTH? 😀

    June 28, 2012 at 7:53 am #377306
    DDDave
    Participant

    Re: Bosch SM150M05GB/28

    Thanks Martin. As far as I know it doesnt come up with a fault code. Is there any test sequence for these machines ?

    June 28, 2012 at 4:18 pm #377307
    Martin
    Participant

    Bosch SM150M05GB/28

    DDDave wrote:Is there any test sequence for these machines ?

    Not to my knowledge unless you are employed by BSH and have one of their laptops you can plug in. Us on the other side of the fence have to make best the info that hangs on the grapevine. Sorry!

    June 28, 2012 at 9:01 pm #377308
    DDDave
    Participant

    Re: Bosch SM150M05GB/28

    Thanks for your help Martin. I will be back to it tomorrow.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.