Hoover HD Vison

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Hoover HD Vison

Viewing 13 posts - 1 through 13 (of 13 total)
  • Author
    Posts
  • August 2, 2012 at 7:01 pm #70766
    Heleniki
    Participant

    Hi i have a Hoover HD Vision 1400 AAA VHD8142 washer machine thats playing up! The machine keeps stopping and the 1200 and time save lights flash 3 times! My husband has checked pipes and filter! Has anyone got any ideas what it could be?

    9 year old son who is football mad, school holidays and no washer 🙁

    August 2, 2012 at 7:31 pm #378881
    A1engineer
    Participant

    Re: Hoover HD Vison

    Pump time out, check filter for blockages

    Filter is under kick panel at bottom of front panel

    August 2, 2012 at 7:49 pm #378882
    Heleniki
    Participant

    Re: Hoover HD Vison

    Hi, My husband has already checked its fine, no blockages.
    From what i can tell the washer fills and starts cycle fine then water pumps out and then stops and lights flash.

    August 2, 2012 at 9:16 pm #378883
    helo_75
    Participant

    Re: Hoover HD Vison

    faulty heater… well documented on here…. and rofl @ behind the kickplate, theres no kickplate on a vision hd

    August 2, 2012 at 10:02 pm #378884
    Heleniki
    Participant

    Re: Hoover HD Vison

    The little square pull down plate at the front where the filter is thats what my hub checked, and pipes. Faulty heater? is there a link sorry im new to all this and a women 🙂 I was left to try figure it out while hub went to football lol!

    August 2, 2012 at 10:05 pm #378885
    helo_75
    Participant

    Re: Hoover HD Vison

    the heater gets a slight earth leak, which fools the machine into thinking its still full of water when its not, a new heater is required

    August 2, 2012 at 10:07 pm #378886
    helo_75
    Participant

    Re: Hoover HD Vison

    washing-machine-forum/hoover-vision-1200-timesaver-mode-t64650.html

    August 2, 2012 at 10:08 pm #378887
    Heleniki
    Participant

    Re: Hoover HD Vison

    Thankyou so much for all your help!
    is it easy to replace? my husband is a mechanic and my dads an electrician do you think between them they could do it?

    August 2, 2012 at 10:24 pm #378888
    helo_75
    Participant

    Re: Hoover HD Vison

    just make sure its unplugged, take off the back, and its there , just above the motor,a bit to the right… its not a bad job as long as the nut is slackend and the seal is loosened off

    good luck

    August 2, 2012 at 10:32 pm #378889
    Heleniki
    Participant

    Re: Hoover HD Vison

    Thank you
    Ive passed all info on to my husband and betwwen kids football/training this weekend he will have a look, thanks again for all your help its much appreciated 🙂

    July 6, 2014 at 8:02 pm #378890
    Heleniki
    Participant

    Re: Hoover HD Vison

    My washer has stopped and is coming up with this error again!
    I put it on drain setting to empty so hubby could have a look and it’s not draining! Any ideas?

    July 6, 2014 at 8:29 pm #378891
    Martin
    Participant

    Re: Hoover HD Vison

    Check the pump filter. See user instructions.

    June 24, 2015 at 4:43 pm #378892
    mike@Great_Baddow
    Participant

    Re: Hoover HD Vison

    I had similar problem with Vision VHD8142. All programs started then stopped after wash part of cycle; with with Timer LED flashing 3 times and 1200 spin speed. This suggests drain out problem, but as others have pointed out can be heating element with earth leak sending false message to controller.
    I knew the drain out was OK as you could switch off machine and start on rinse cycle which it did OK. Changed heater element (cost £23) and all works fine now.

  • Author
    Posts
Viewing 13 posts - 1 through 13 (of 13 total)
  • You must be logged in to reply to this topic.