candy GO282 goes straight to fill

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › candy GO282 goes straight to fill

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • August 6, 2012 at 2:38 pm #70821
    slyp98
    Participant

    hi guys , have this m/c select program all lights flash once then off and m/c starts to fill and fill and fill , tried pess switch no joy looked at board lots of the tracks are furry and dry joints too , anyone got this prob b4 cheers

    August 8, 2012 at 9:38 am #379068
    electrofix
    Moderator

    Re: candy GO282 goes straight to fill

    first call on all these type of faults is earth problems nice to rule it out early as a lot of electronic controlled parts are neutral switched

    next i would change the triac on the board that controls the valve. it does not take a lot of leakage to fire a valve

    after that its probably the board

    Dave

    August 8, 2012 at 1:02 pm #379069
    slyp98
    Participant

    Re: candy GO282 goes straight to fill

    cheers dave , no earth fault so i’m just gonna bite it and order a board cheers

    August 8, 2012 at 4:29 pm #379070
    electrofix
    Moderator

    Re: candy GO282 goes straight to fill

    its prob only the triac

    find out which one by buzzing wires back and solder another one in. do it all the time and if you pinch it off a scrap board it cost nothing to find out


    Dave

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.