siemens dishwasher

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › siemens dishwasher

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • August 22, 2012 at 7:00 am #71079
    suedehead1
    Participant

    SN26M890GB/07

    it drains then fills for a second then stops with a humming noise from the solenoid and after a while shows E17.

    i am getting correct reading through the valve and it isd getting water but will not fill,
    any ideas welcome.

    August 22, 2012 at 5:44 pm #379980
    RickT
    Participant

    Re: siemens dishwasher

    E17 is water level too high check flow-sensor.

    August 22, 2012 at 6:34 pm #379981
    suedehead1
    Participant

    Re: siemens dishwasher

    thanks very much

    February 26, 2013 at 8:04 am #379982
    suedehead1
    Participant

    Re: siemens dishwasher

    the customer is back on the phone again he has been fighting with johnlewis but got nowhere.
    I was on the siemens website but cant see a flow sensor anywhere.
    anyone know the part no. thanks.

    February 26, 2013 at 8:05 am #379983
    suedehead1
    Participant

    Re: siemens dishwasher

    ok found it 611317.

    March 15, 2013 at 7:12 pm #379984
    suedehead1
    Participant

    Re: siemens dishwasher

    resurecting an old thread got exactly the same problem with the same model of dishwasher changed the flow meter and its still the same any ideas welcomed.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.