Tricity Bendix DH086

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Tricity Bendix DH086

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • December 14, 2004 at 9:02 am #7108
    BobHope
    Participant

    Anyone help with this one, this dishwasher keeps going into anti flood.
    Done all the normal checks cleaned the syphon tubes and all that, machine works fine when the water inlet pressure is released some times for days then the fault returns.

    Cheers Bob.

    December 14, 2004 at 9:19 am #121448
    Penguin45
    Participant

    Faulty diaphragm on inlet valve most likely culprit – had this a few times and had to replace the valve.

    Regards,
    Chris.

    December 14, 2004 at 9:23 am #121449
    Simon46
    Participant

    Re: Tricity Bendix DH086

    Make sure no water has gone down the tubes or is in the diaphraghm.

    December 14, 2004 at 9:23 am #121450
    BobHope
    Participant

    Re: Tricity Bendix DH086

    Cheers Chris,
    have allready ordered inlet valve and pressure switch, nice to have a second opinion.
    Thanks Bob.

    December 18, 2004 at 11:14 am #121451
    The-specialist
    Participant

    Re: Tricity Bendix DH086

    The air chamber is blocked m8.And overfilling .
    You will need to fit new sump 😆

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.