- This topic has 5 replies, 2 voices, and was last updated 13 years, 8 months ago by
.
-
Posts
-
After washing cycle, door lock clicks 4 or 5 times. Door will not open. About a minute later, door clicks 4/5 times & pump starts up – all lights flash & error code F-06. Door will still not open.
After leaving unplugged for 30 mins, door will still not open, even if left unplugged. Will however release with the overide tab.
Can restart any washing cycle after leaving unplugged, only to return to previous at the end.Filter is clear, have also tried activating the pressure switch by blowing/sucking through the hose. Hose to the drum also clear from switch end.
Anyone have any diagnosis ideas. Idon’t want to buy a door interlock for nothing.
Thanks in advance.Re: Hotpoint WMF720 Fault Code F-06 Diagnosis Help Needed
F06 is a door lock related fault most of the time, can also be bad connections between doorlock and main pcb or even a fault on the pcb itself.
Re: Hotpoint WMF720 Fault Code F-06 Diagnosis Help Needed
THanks for the quick reply iadom. Connections seem ok.
Is there any way to determin if the switch is at fault?Re: Hotpoint WMF720 Fault Code F-06 Diagnosis Help Needed
Not without breaking it part. Trying a new door lock is the cheapest option if you have eliminated bad connections etc.
Re: Hotpoint WMF720 Fault Code F-06 Diagnosis Help Needed
Fixed it, for now anyway. It could well be the door interlock.
I tried to start a cycle with the door open several times. The expected door open alarms triggered with several attempts at locking the latch. Half a dozen lock attempts might have freed something up inside it.Thanks for your help. If it goes again, then I’ll just have to bite the bullet.
- You must be logged in to reply to this topic.