Zanussi ZWF1430w W/M

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanussi ZWF1430w W/M

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • September 12, 2012 at 4:34 pm #71452
    larry
    Participant

    I have been to this zanussi washing machine today when its switched on the display says 2.18 which i believe is the time the wash takes you cannot select any other washes and when the start button is pressed it just says error. I wodered if anyone has had this before with one of these machines also is this some sort of fault code be gratefull of some help with this one please.Larry.

    September 12, 2012 at 4:58 pm #381075
    Allsorts
    Participant

    Re: Zanussi ZWF1430w W/M

    1. Reset the set programme with the SKIP/RESET (8) button and then switch the appliance off.
    2. Press the START/PAUSE (7) and SKIP/RESET (8) button simultaneously and then, holding the
    buttons down, switch the appliance on with ON/OFF button.
    3. Hold the buttons down till the buzzer sounds and the LEDs start flashing (about 4 seconds).

    George

    September 12, 2012 at 5:10 pm #381076
    larry
    Participant

    Re: Zanussi ZWF1430w W/M

    Thanks George when the leds start flashing does this mean the machine is reset and should go into a programme then

    September 12, 2012 at 10:28 pm #381077
    leavemetogetonwithit
    Participant

    Re: Zanussi ZWF1430w W/M

    Had something like it a couple of weeks ago. Similar but probably not the same model. Turned out to have two buttons on front linked by a lock symbol (only seen when observed closely – after I’d been there for half an hour). Child lock.
    Mike.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.