- This topic has 2 replies, 2 voices, and was last updated 13 years, 6 months ago by
.
-
Posts
-
Hi Guys been to a Blomberg condensing tumble dryer TKF 1230A which wasn’t heating due to one of the t/stats on the heater being duff.replaced heater + stats (1 unit) it now heats intermittently sometimes the prog ends before it should & other times the cycle starts to heat then the heat stops but the cycle keeps going & tumbling. Are there other sensors to look out for or could it be the timer playing up. Cheers Mack.
Re: blomberg tumble dryer
Check for fan blockage or condenser box blockage both cause the problem of heater going off for long times, theres a NTC on the front near door position on most of these new type Beko/Blomberg dryers.
Re: blomberg tumble dryer
Thanks Seamy I will look at that.We don’t get many tumble dryers in Cyprus so I was surprised when I looked at this condensing one without a water feed & a light inside the drum. Whatever next! & I understand these have an extra fan to blow cool air over the condenser & humidity sensors in the drum.Bit different to the washer dryers we love to hate.Thanks Mack.
- You must be logged in to reply to this topic.