- This topic has 3 replies, 3 voices, and was last updated 13 years, 6 months ago by
.
-
Posts
-
Good evening all,
Wondering if one has to remove the above unit in order to remove and replace the clock/timer unit?
Had a brief look when confirming clock/timer u/s, and unsure on front panel removal procedure to access above.
Does one need to pull the unit completely out to access further screws at rear of unit, or can one renew clock/timer more readily?
Any help much appreciated.
Jon
Re: Rangemaster 110 Clock/Timer Renewal – Eectric – 5344
by electric youmean solid plate or ceramic? either way I think you need to get to the screws at the rear.
Re: Rangemaster 110 Clock/Timer Renewal – Eectric – 5344
yes as mark says you have to remove two screws behind ceramic plate, if it has a lid, they are only exposed when you lift the lid.
When you have taken the screws out you have to slide the plate to the left to lift it off.
- You must be logged in to reply to this topic.