- This topic has 2 replies, 2 voices, and was last updated 13 years, 6 months ago by
.
-
Posts
-
Hi Guys Got to go look at Bosch condenser tumble dryer later in the week. Customer says you put the clothes in, it then decides how long the prog is & displays the time & off it goes after about 3 mins it switches off & the display goes blank. No error code coming up. Every time you put it on this is what happens. Any ideas.Thanks Mack.
Re: Bosch WTE8630SGB T/DRYER
Hi Martin just went & cleaned it all out not that bad really.the display does seem to have a mind of its own sometimes.put it on a cycle empty it came up with 1hr 20mins or something heated & tumbled ok then after about 5 mins counted down to 1 min on display(presumably the humidity sensors working ok) then finished normally.after the cust had done a wash & put damp clothes in same as b4 after initially working ok for 3 mins the display goes blank & it switches off. I asked them to put it on the preset timed program that doesn’t work either.Is there a known problem with the board or selector switch. Thanks Mack.
- You must be logged in to reply to this topic.