bosch code

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › bosch code

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • September 21, 2012 at 8:44 am #71595
    dopper
    Participant

    cant see this code in book, its a boch sis4140gb14 the spin and ens light flashing as well as the start it wont do anything
    anyone advise
    dop

    September 21, 2012 at 10:07 am #381601
    electrofix
    Moderator

    Re: bosch code

    model number does not seem to be correct please check

    also what appliance is it washer / dishwasher ?

    check to see if any of the light flash a sequence
    ie 4 flashes stop then repeat

    Dave

    September 21, 2012 at 10:54 am #381602
    dopper
    Participant

    Re: bosch code

    sorry its wis24140gb14

    September 25, 2012 at 8:14 am #381603
    dopper
    Participant

    Re: bosch code

    and its a washer

    September 25, 2012 at 9:25 am #381604
    Martin
    Participant

    Re: bosch code

    I have no idea what that error code represents but I can only suggest you check all the usual (motor,heater,base flood switch etc) to see if anything shows up?

    What have you checked so far anyway?

    September 25, 2012 at 3:26 pm #381605
    dopper
    Participant

    Re: bosch code

    going to night to have a good look

    September 25, 2012 at 6:20 pm #381606
    nomadPaul
    Participant

    Re: bosch code

    You will need the relevant spin speed led that’s flashing too.
    I.e if it’s the middle spin speed LED and the bottom 2 progress LED’s (spin and end ?) then that’ll be F:43 – motor fault .

    The combination of LED’s is important so if you post the correct one’s here , i’ll try and point you in the right direction.

    P.s If it is F:43 motor fault , you’ll need to also reset the machine via the test program after sorting the problem

    September 29, 2012 at 12:23 pm #381607
    dopper
    Participant

    Re: bosch code

    cheers we couldnt get it out fixed in solid told them they would have to get it out!

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.