Hoover HOD6615 Dishwasher no heat

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hoover HOD6615 Dishwasher no heat

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • September 23, 2012 at 9:48 am #71619
    johnnyj
    Participant

    Can anybody help got one of these no heat, i’ve checked the element, looked at the module for dry joints, it seems to fill okay and wash i noticed there is a pressure switch situated in the bottom feed pipe whch is wired in series with the heater does anybody know if these cause any problems chhers JJ.

    September 24, 2012 at 4:58 pm #381653
    Dragan
    Participant

    Re: Hoover HOD6615 Dishwasher no heat

    Hi Johnnyj,
    it is possible to check pressure switch.Disconnect wires and connect the other ones connected with Your ohmmeter.Start the machine and wait for spray pump start.If You read 0 ohms- pressure switch is OK.
    Also,You shold check wires continuity from PCB and door MS to heater and pressure switch.Heater releay on PCB,too.

    Dragan

    September 24, 2012 at 6:59 pm #381654
    johnnyj
    Participant

    Re: Hoover HOD6615 Dishwasher no heat

    Cheers Dragan i went back and bypassed the pressure switch and it started heating so got one on order, JJ

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.