Painasonic NN-D801

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Painasonic NN-D801

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • December 20, 2004 at 5:46 pm #7180
    clivejameson
    Participant

    Hi peeps
    Any one had probs with these cutting out out after about 15 secs of cooking (micro and convection)? Everything just resets to initial power on display, i.e. the clock setting goes too.
    Checked the thermistor seems ok (300k at room temp with temp variation reading ok), checked pcb earth (solder blobs aroung mounting screws), checked damper motor ok and weight sensor unit visibly checked.
    Would appreciate any suggestions before replacing a very expensive pcb!
    Cheers
    Clive

    December 21, 2004 at 9:10 am #121800
    BobHope
    Participant

    Re: Painasonic NN-D801

    Hi Clive,
    have you checked the cooling fan.

    Bob.

    December 21, 2004 at 6:26 pm #121801
    clivejameson
    Participant

    Re: Painasonic NN-D801

    Hi Bob
    Thanks for your thoughts…the cooling fan appears to work ok
    Looks like it’ll be a new board if it’s still available 🙁
    Cheers
    Clive

    December 21, 2004 at 6:35 pm #121802
    Dave_Conway
    Participant

    Re: Painasonic NN-D801

    Clive, send the PCB to QER, they will test andrepair if required and a whole lot cheaper than a new board.

    SEME (the main Panasonic agent) want circa £170 ex VAT for it :eeek:

    http://www.qer.biz/servReps.htm 😀

    Dave.

    December 21, 2004 at 9:04 pm #121803
    clivejameson
    Participant

    Re: Painasonic NN-D801

    Hi Dave

    Thanks for that…i can get a genuine new board cheaper than that 😉 but still expensive.
    I’ll give QER a call in the morning and see what they can offer

    Clive

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.