Zanussi ZT6905

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanussi ZT6905

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • December 21, 2004 at 4:33 pm #7191
    Seamy
    Participant

    Gotta go to a Zanussi ZT6905 fully integrated dishwasher tomorrow, customer says that when appliance is started it will only go for a few minutes & stops, when she opens door rinse hold light is lit, any ideas, told her to reselect programme & deselect rinse option, but she says this happens on all programmes, any guidance is appreciated as i’m above my eyeballs at the min’

    Seamy

    December 21, 2004 at 4:42 pm #121880
    Martin
    Participant

    Re: Zanussi ZT6905

    Seamy,

    Quite a mixed bag for the error warning (L1) but here goes, it could be either: –

    The Tap OFF
    Water pressure too low
    Aquastop device activated
    Anti Flood Device
    Pressure switch blockage
    Water flow within IWMS
    or Drain hose syphoning

    Hope that helps :tup:

    Martin

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.