Zanussi ZT6905

[Seamy]

Gotta go to a Zanussi ZT6905 fully integrated dishwasher tomorrow, customer says that when appliance is started it will only go for a few minutes & stops, when she opens door rinse hold light is lit, any ideas, told her to reselect programme & deselect rinse option, but she says this happens on all programmes, any guidance is appreciated as i’m above my eyeballs at the min’

Seamy

[Martin]

Re: Zanussi ZT6905

Seamy,

Quite a mixed bag for the error warning (L1) but here goes, it could be either: –

The Tap OFF
Water pressure too low
Aquastop device activated
Anti Flood Device
Pressure switch blockage
Water flow within IWMS
or Drain hose syphoning

Hope that helps :tup:

Martin

[Author]

Posts