- This topic has 9 replies, 4 voices, and was last updated 13 years, 5 months ago by
.
-
Posts
-
Hi, We have a hotpoint aquarius wf321, it was last used 3 days ago and worked fine, come to use it 2 days later and nothing, no power light, nothing lighting up on the dash at all, checked the wall socket and checked the plug, had the top off the machine and back panel,cannot see any loose wires and no smell of any burning, the thing is just dead, any help would be greatly appreciated.
Karl. 🙂
Re: washing machine no power
Mains cable, mains interference filter or the main power switch faulty could all cause this.
K.
Re: washing machine no power
kwatt wrote:Mains cable, mains interference filter or the main power switch faulty could all cause this.
K.
the mains cable and switch are fine.
Re: washing machine no power
Allsorts wrote:Also check to see if it has tripped the RCD in the main consumer unit.
RCD is ok
Re: washing machine no power
Am back again, Had another go at the washing machine today, double checked the things I already looked plus checked the power cable filter and thats ok, replaced the door switch thats ok, replaced the front panel pcb, checked the motor brushes ok, I think the only thing left to replace is the main control panel. any other things I should check before I get another control panel. :hmm:
Re: washing machine no power
Unplug the wiring block from the mains filter. Common for these to burn out.
Re: washing machine no power
Hi, yes I unpluged the wiring block on the filter, this is where I checked for the power coming into the machine.
- You must be logged in to reply to this topic.