Zanussi ZWG7120P 0 error code + 3beeps

This topic has 6 replies, 2 voices, and was last updated 13 years, 5 months ago by johnnyhoz.

Viewing 7 posts - 1 through 7 (of 7 total)

Author

Posts
October 16, 2012 at 2:29 pm #71993

johnnyhoz
Participant

The above machine won’t respond to program settings it just displays zero and beeps three times, have had it draining once for a second it then stops beeps three times and reads zero on the display again.
I’m probably missing it but did look on the known effor codes but couldn’t see it
please help
John

October 16, 2012 at 3:10 pm #383008

Seamy
Participant

Re: Zanussi ZWG7120P 0 error code + 3beeps

Probably water in the base of appliance.

October 16, 2012 at 3:33 pm #383009

johnnyhoz
Participant

Re: Zanussi ZWG7120P 0 error code + 3beeps

There is no signs of water it’s an open bottomed washing machine,

October 16, 2012 at 5:34 pm #383010

Seamy
Participant

Re: Zanussi ZWG7120P 0 error code + 3beeps

E30 is water level/pressure switch fault
EF3 is aqua control fault

October 16, 2012 at 7:17 pm #383011

johnnyhoz
Participant

Re: Zanussi ZWG7120P 0 error code + 3beeps

Thanks Seamy I wish the display was showing either of those codes but it is definatelty zerro or O and three beeps.
Does anyone have the Service Manual for this model

October 17, 2012 at 6:57 am #383012

Seamy
Participant

Re: Zanussi ZWG7120P 0 error code + 3beeps

Getting into diagnostics is same as other Zannies.
Fault codes are same, E10s are water fill faults, E20s are water drain/pump issues, E30s are pressure switch related, E40s are door problems, E50s motor, E60s heater, E70s NTC, E80s selector, E90 configuration.

October 17, 2012 at 12:38 pm #383013

johnnyhoz
Participant

Re: Zanussi ZWG7120P 0 error code + 3beeps

Hi Seamy
be greatful for the service manuel
my email is aaa.rep@ntlworld.com
Thanks
John
Author

Posts

Viewing 7 posts - 1 through 7 (of 7 total)

You must be logged in to reply to this topic.