Hotpoint c367ekh front control panel

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint c367ekh front control panel

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • November 5, 2012 at 5:08 pm #72356
    allan
    Participant

    Bit of advice please? Been out to fit oven door switch on a hotpoint c367ekh freestanding cooker, released all screws at front and rear but it is still held by 3 screws under control facia, took of control and timer knobs, two screws above grill door but can’t move facia, I’m sure I did one before and facia pushed to the left to release but this ones solid didn’t want to start banging it too hard as customer was quite interested to watch!
    Am I missing something? Looks like the ceramic top is held on front behind this facia too
    Thanks

    November 5, 2012 at 7:45 pm #384311
    johnnyj
    Participant

    Re: Hotpoint c367ekh front control panel

    2 screws undernesth remove all the knobs and a dunt to the left and it should come off might be stuck due to spillage, on the sponge seal on the top.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.