Hotpoint timer diagram

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint timer diagram

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • November 15, 2012 at 1:25 pm #72542
    paulun
    Participant

    Hi pulled wires off hotpoint tumble dryer timer one by one but still think Iv made a mistake need a timer wiring diagram for a CTDOOG DATE CODE 95 Thanks.

    November 15, 2012 at 1:33 pm #384833
    electrofix
    Moderator

    Re: Hotpoint timer diagram

    you should be able to check it with an ohm meter

    you know that the heater and motor are in circuit but the heater turn off 5-10 mins from end

    so with side off set timer at 5 mins measure resistance and disconnect motor to check reading dissapears ( you will still have a higher reading due to the timer motor
    then turn timer to where element is in and reading should go down
    watching meter if you turn timer down you should see heater disconnet first then motor
    the only thing you could get wrong then is the reverse contacts

    hope this may help

    dave

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.