Hotpoint WF320 door locking light flashing

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Hotpoint WF320 door locking light flashing

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • November 16, 2012 at 11:15 pm #72569
    keef666
    Participant

    Hi,
    My washing machine will not work at all.
    I have tried all different programs and the machine will not work.
    All the leds light up at ‘cancel’ , if I put it onto pump out (shortest program)after a few minutes the door lock starts flashing, the washer does not function at all. I have changed the door interlock and the door is locked after as it should be although this happened before I changed the door interlock. I have removed the pump check it with a meter and it is alright, I also checked the wiring between the pump and PCB at this point and this reads alright. I am at a loss now, please help.
    :rolls:

    November 16, 2012 at 11:49 pm #384913
    iadom
    Moderator

    Re: Hotpoint WF320 door locking light flashing

    Check the motor brushes and wiring connections. 😉

    November 17, 2012 at 12:13 am #384914
    keef666
    Participant

    Re: Hotpoint WF320 door locking light flashing

    What motor?

    November 17, 2012 at 8:41 am #384915
    Muv
    Participant

    Re: Hotpoint WF320 door locking light flashing

    The one connected to the drum via a black belt!

    Martin

    November 17, 2012 at 2:56 pm #384916
    keef666
    Participant

    Re: Hotpoint WF320 door locking light flashing

    Oh okay the drum motor, I’ll have a look in a minute.
    🙂

    November 20, 2012 at 4:02 pm #384917
    keef666
    Participant

    Re: Hotpoint WF320 door locking light flashing

    Hi,
    Checked the brushes they are about 3/8 on the long side and about 5/16 on the shorter side.

    November 20, 2012 at 4:50 pm #384918
    iadom
    Moderator

    Re: Hotpoint WF320 door locking light flashing

    Worth trying some new brushes and make sure you tighten up the tiny pins in the motor plug, if that doesn’t fix it then it might be time to invest in a decent machine. 😉

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.