Zanussi ZWF1632 Prod 91452111002 Program Locked

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanussi ZWF1632 Prod 91452111002 Program Locked

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • November 26, 2012 at 12:24 pm #72723
    Bernie
    Participant

    The Program is locked with cottons, 40deg, and spin 1600 it will not cancel, no fault code, cannot enter diagnostics if you push any button it beeps three times that’s all it will do.
    I did try a new door lock but with no change
    Any help suggestions much appreciated
    Bernie

    November 26, 2012 at 12:41 pm #385401
    Martin
    Participant

    Re: Zanussi ZWF1632 Prod 91452111002 Program Locked

    3 beeps is a dead giveaway to there being a problem with the pressure switch sensing (anti-boil 1st level sensing). Whilst your there checking that out don’t forget to Megger the heater! 😉

    November 26, 2012 at 12:56 pm #385402
    Bernie
    Participant

    Re: Zanussi ZWF1632 Prod 91452111002 Program Locked

    Thanks for the quick reply Martin
    Would the pressure switch lock up the machine?

    November 26, 2012 at 11:42 pm #385403
    leavemetogetonwithit
    Participant

    Re: Zanussi ZWF1632 Prod 91452111002 Program Locked

    I think child lock does that. Can’t remember how to release it but it’s probably in the user manual.
    Mike.

    November 27, 2012 at 5:58 am #385404
    captaincaveman1
    Participant

    Re: Zanussi ZWF1632 Prod 91452111002 Program Locked

    Check for one of the buttons being stuck in on the fascia

    November 27, 2012 at 10:59 am #385405
    Bernie
    Participant

    Re: Zanussi ZWF1632 Prod 91452111002 Program Locked

    Thanks to all of you for you suggestions, I went this morning to have another go but no luck still all locked up they are going to get a new machine.
    Once again thanks
    Bernie

    November 28, 2012 at 12:36 am #385406
    leavemetogetonwithit
    Participant

    Re: Zanussi ZWF1632 Prod 91452111002 Program Locked

    I think it was a 1400 ZWD I looked at a few months ago. I found the solution in the service manual IIRC. Can’t find it now but a quick Google Zanussi child lock reminds me that there may be a couple of buttons linked by a lock symbol and you just press them together and hold for 5 seconds. Had a look at manual for a similar model to yours though and found nothing there.
    Mike.

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.