- This topic has 2 replies, 1 voice, and was last updated 13 years, 4 months ago by
.
-
Posts
-
Hi all
My DWF409 has started playing up. Sometimes it will run all through a program and sometimes it will stop just after the fill stage. Last night I watched it and when it failed all LEDs inc power went out – dead. Opened and shut the door and it started again.
Again it packed in but this time I banged then pushed against the door handle region. It started again I waited a while and went to bed and in the morning program was completed.Does this seem like a dooor switch fault ? If so can you recommend the best place for a replacement ?
Cheers
JS
Re: Smeg DWF409 – suspected door switch
Update –
OK checked the door switch (Bitron type S16) and all seems Ok.
Thinking about it also this couldn’t really be causing the power-cut issue as the mains button LED also extinguishes when
the unit was stopping part through a programme. Banging on the
front panel though does ‘bring it back alive’ so a loose connection or dry solder joint somewhere I imagine.Strange thing is that once it ‘gets going’it’s usually ok until the end of the program..
.. not sure where to look next – the feed to the switch I guess. 😐
BR
James 😐
Re: Smeg DWF409 – suspected door switch
I think I isolated the fault to the main plastic encased pcb.
examined it for wobbly joints but nada. Put it back together and now properly nadgered. Not worth a 120 + VAT for new pcb on a ten year machine so ordered a new machine (principally to keep Mrs quiet) – not happy with the outcome but what can one do.. ?JS
- You must be logged in to reply to this topic.