- This topic has 4 replies, 3 voices, and was last updated 13 years, 4 months ago by
.
-
Posts
-
The water pump was not working, so I changed it and it’s still not working. Can someone PLEASE tell me what is wrong. I tested the wires at the pump and the one has 240v which is in the positive. I need URGENT HELP!!!
Thanks
Johan
Re: Hoover washing machine HNF7167
What was wrong with the old pump?
If it had failed electrically, burnt out or had signs of water damage then there is a very strong chance that the faulty pump has blown the main circuit board. 😥
These Candy machines do suffer from hose leaks onto the drain pump.
Re: Hoover washing machine HNF7167
No leaks, pump still working, but when I took the plugs off the back of the pump, there was burnt marks on both. I thought the pump went and just replaced it. What I don’t understand is, how come there is 240v at the one wire but it is still not working.
Re: Hoover washing machine HNF7167
If the pump connector plug had signs of burning on it then its odds on that it has had a slight leak from the inlet hose onto the pump, you rarely see the leak on the floor, a bad design to have an uncovered pump directly under a potential leak area.
Not sure how clued up you are electrically but you need more than a live feed. 😉
If you can get the pcb out I will bet good money that you will find blown components in the middle of the board, done with with the mains plug removed. :zap:
NB. There is no need whatsoever to ‘live test and ‘ given your questions about the live feed you have to the pump I would respectfully suggest you get someone with the proper skills to assist you.
Sent from my iPad using Tapatalk HD
- You must be logged in to reply to this topic.