DWH B10 IKEA WHIRLPOOL 7 FLASHES

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › DWH B10 IKEA WHIRLPOOL 7 FLASHES

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • December 28, 2012 at 3:56 pm #73244
    misterroy
    Participant

    I have cleaned fat out of the pressure sensor and tried a voltmeter on the flow meter, it read something like 0.08 volts when filling. I cleaned the contacts to the flow meter. I am still getting 7 flashes.
    Any ideas?

    December 28, 2012 at 6:06 pm #386876
    repman
    Participant

    Re: DWH B10 IKEA WHIRLPOOL 7 FLASHES

    WPL481231019147 is the part number for the flow meter that you need

    Jim

    December 30, 2012 at 8:04 am #386877
    misterroy
    Participant

    Re: DWH B10 IKEA WHIRLPOOL 7 FLASHES

    I take it that with a little pressure the part will slide out?
    Thank you

    December 30, 2012 at 10:09 am #386878
    misterroy
    Participant

    Re: DWH B10 IKEA WHIRLPOOL 7 FLASHES

    I have taken the reed switch out and tested it with a magnet, and continuity tester. It is still working when not in the machine. I dont have a way of testing if the number of pulses is 10 per second or greater until I go back to work.

    December 30, 2012 at 6:21 pm #386879
    repman
    Participant

    Re: DWH B10 IKEA WHIRLPOOL 7 FLASHES

    I’ve had them work with a magnet out of m/c and then work for a short time once replaced, think you use a stronger magnet to test with.90{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} certain it will be your problem.

    Jim

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.