miele W504 washing machine underfilling

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › miele W504 washing machine underfilling

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • January 3, 2013 at 8:29 pm #73335
    boselecta
    Participant

    Went to this machine as customer complained was overfilling/ not draining quick enough etc.

    As I thought the pressure vessel was very blocked, after cleaning the pressure vessel the machine now takes only about half a cm of visable water and boiles the water in a few minuites when element comes on.

    Have cleared out chamber pretty thoroughly now but still will not take any more water.,

    Any advice guys?

    January 3, 2013 at 9:04 pm #387130
    DrDill
    Participant

    Re: miele W504 washing machine underfilling

    Have you tried it with clothes in?


    Sent from my iPhone
    http://www.kitchenkitsw.com

    January 3, 2013 at 11:07 pm #387131
    eastlmark
    Moderator

    Re: miele W504 washing machine underfilling

    Some of the older Miele models go into a default mode once the air bell is blocked. Only way to re-set is a new control pcb or a Miele man and his laptop. Dont think this is one of these though.

    January 3, 2013 at 11:08 pm #387132
    boselecta
    Participant

    Re: miele W504 washing machine underfilling

    no, I said I will go back tommorow so I will try this, although I cant see it making any difference.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.