Beko tumble dryer

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Beko tumble dryer

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • January 7, 2013 at 7:16 pm #73414
    Gordy29
    Participant

    Is there a problem with the bearings or belts. I’ve had 3 of these drum, jammed take the drum out,can’t see why it jammed.have I missed something.thank,s Gordy 29

    January 7, 2013 at 7:18 pm #387417
    repman
    Participant

    Re: Beko tumble dryer

    Had a few of those where front tub seal mangles up and jams the drum

    Jim

    January 7, 2013 at 7:29 pm #387418
    johnnyj
    Participant

    Re: Beko tumble dryer

    I usualy change the front bearing pads when i change the belts as the 1st one i did snapped the belt after in about a fortnight, changing the bearing pads at the same time on them since and i havent been called back once.

    January 7, 2013 at 10:34 pm #387419
    GPservice
    Participant

    Re: Beko tumble dryer

    Change the front bearing felt and make sure there is no glue stuck round the front of the drum it can easily jam if not cleaned off.

    January 8, 2013 at 2:38 pm #387420
    tomsino
    Participant

    Re: Beko tumble dryer

    the front felt needs to be replaced. the felt wears or comes off and drum sticks to felt.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.