Whirlpool AWZ121 button won’t latch

Home › Forums › Public Support Forums › Help And Support › Tumble Dryer Help Forum › Whirlpool AWZ121 button won’t latch

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • January 9, 2013 at 7:42 pm #73464
    spider66
    Participant

    Out AWZ121 is a few years old and has worked faultlessly until now.
    I works – the drum turns and it gets warm – while the button is held in but stops immediately the button is released.
    It won’t work while the door is open but will work when the door is closed so long as the button is held in. There’s a mechanical link to the back of the button which appears to operate OK.
    Could anyone suggest what’s wrong please or offer any fault-finding tips?

    January 9, 2013 at 7:59 pm #387577
    johnmac11
    Participant

    Re: Whirlpool AWZ121 button won’t latch

    The switch is knackered, replacement one here in the shop

    http://shop.ukwhitegoods.co.uk/48122761 … ush-switch

    John

    January 9, 2013 at 8:53 pm #387578
    spider66
    Participant

    Re: Whirlpool AWZ121 button won’t latch

    Thanks very much for your reply. I’ll give that a try.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.