zanussi zjd12191

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • #73540
    suedehead1
    Participant

    hi can anyone tell me how to get this machine to go into diagnostic mode it refuses all attempts.
    thanks.

    #387869
    Seamy
    Participant

    Re: zanussi zjd12191

    If it refuses its probably got a faulty p.c.b

    #387870
    suedehead1
    Participant

    Re: zanussi zjd12191

    the machine works ok but wont dry i am sure i am just not doing it properly.

    #387871
    Martin
    Participant

    Re: zanussi zjd12191

    suedehead1 wrote:the machine works ok but wont dry i am sure i am just not doing it properly.

    Could you perhaps elaborate more on what exactly is the dryer issue/s?

    #387872
    suedehead1
    Participant

    Re: zanussi zjd12191

    its not drying fan motor ok heating elements ok for continuity thermostats ok
    solenoids ok if i could get it into the diagnostics i could get a fault code.

    #387873
    Martin
    Participant

    Re: zanussi zjd12191

    Accessing diagnostics is described in the ‘Known Error Codes’ thread.

    Have you cleaned out the condenser?
    Checked the bottom NTC leads aren’t broken?
    Is the water flowing through the condenser OK?
    Drain pump running?

    #387874
    suedehead1
    Participant

    Re: zanussi zjd12191

    the machine has an on off button and a dial the known error code
    thread is not clear how to put that version into diagnostics.
    i had the condenser off and checked the ntc wires.

    #387875
    Martin
    Participant

    Re: zanussi zjd12191

    Here’s a bit of healthy reading for you then : –

    http://tinyurl.com/am7zuaz

    #387876
    suedehead1
    Participant

    Re: zanussi zjd12191

    thanks very much i appreciate it.

Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.