zanussi zjd12191

[suedehead1]

hi can anyone tell me how to get this machine to go into diagnostic mode it refuses all attempts.
thanks.

[Seamy]

Re: zanussi zjd12191

If it refuses its probably got a faulty p.c.b

[suedehead1]

Re: zanussi zjd12191

the machine works ok but wont dry i am sure i am just not doing it properly.

[Martin]

Re: zanussi zjd12191

suedehead1 wrote:the machine works ok but wont dry i am sure i am just not doing it properly.

Could you perhaps elaborate more on what exactly is the dryer issue/s?

[suedehead1]

Re: zanussi zjd12191

its not drying fan motor ok heating elements ok for continuity thermostats ok
solenoids ok if i could get it into the diagnostics i could get a fault code.

[Martin]

Re: zanussi zjd12191

Accessing diagnostics is described in the ‘Known Error Codes’ thread.

Have you cleaned out the condenser?
Checked the bottom NTC leads aren’t broken?
Is the water flowing through the condenser OK?
Drain pump running?

[suedehead1]

Re: zanussi zjd12191

the machine has an on off button and a dial the known error code
thread is not clear how to put that version into diagnostics.
i had the condenser off and checked the ntc wires.

[Martin]

Re: zanussi zjd12191

Here’s a bit of healthy reading for you then : –

http://tinyurl.com/am7zuaz

[suedehead1]

Re: zanussi zjd12191

thanks very much i appreciate it.

[Author]

Posts